DSG Kućište za maticu 12,00 KM20,00 KM
BF oslonci za navojna vretena 18,00 KM25,00 KM

BK oslonci za navojna vretena

Kućište ležaja za trapezoidne i vretenaste pogone sa kugličnim zavrtnjem za fiksnu stranu.

Na stanju

Sku:0032

32,00 KM50,00 KM

Poništi izbor

Pictures and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data. 


Noseće jedinice kućišta ležaja za vreteno kugličnog zavrtnja mogu se koristiti na fiksnim i oslonjenim krajevima kugličnog zavrtnja, čime se kuglični vijak montira u željeni položaj. Njegova kompaktna veličina se lako instalira, posebno u suženom prostoru. Pošto su ležajevi podmazani i podešeni u odgovarajući položaj, nema potrebe za dodatnim centriranjem ili procesima ugradnje, što skraćuje vreme ugradnje i održavanja.
Nudimo samo one tipove koji se najčešće koriste kod većine korisnika, na primer, većina naših modela nosi osovine do 20/25 mm. Ukoliko ste zainteresovani za neke vrste koje nisu prikazane u gornjoj tabeli ili u našoj online prodavnici, možete nam poslati e-mail sa vašim zahtevom i možemo vam dati ponudu za sve modele i veličine dostupne na tržištu.


Napomena:
U odeljku „DOWNLOADS“ možete preuzeti: 3D modele, 2D crteže i druge dokumente!

Assembly Examples

Section view example of ballscrew supported and fixed end housing

ballscrew supported and fixed site

Example of mounting the housing to the Ballscrew

ballscrew housing mounting

Checking the Accuracy and Fully Fastening the Support Unit

ballscrew housing accuracy

While checking the runout of the ball screw shaft end and the axial clearance using a dial gauge, fully fasten the ball screw nut, the nut bracket, the fixed side Support Unit and the supported-side Support Unit, in this order

Connection with the Motor

ballscrew motor mounting

Ballscrew Assembly

par

Product Description

Ball Screw Support Units

Ball Screw Support Units are helpful supplements to your Ball Screw System. Our current Ball Screw Accessories include fixed and supported-side support bearing assemblies for light and heavy load applications. These ball screw support units provide users with the necessary components (i.e. bearing locknuts, snap rings, etc.) for mounting screw shafts to their machine. Offered in six different series, the surfaces of these support units are treated with black oxide to prevent corrosion, and are available in either a rectangular or rounded design.


 Ball Screw Support Units

ballscrew units type

Ball Screw Support Units are helpful supplements to your Ball Screw System. Our current Ball Screw Accessories include fixed and supported-side support bearing assemblies for light and heavy load applications. These ball screw support units provide users with the necessary components (i.e. bearing locknuts, snap rings, etc.) for mounting screw shafts to their machine.

Fixed-Side Support Units

The Fixed-Side Support Units are available in three series, EK, BK, and FK. These support units are compact in size and allow for easy installation. The fixed-side support units are the driven side of the support unit and are coupled to the motor using a coupling. These fixed-side support units come with a spacer and lock nut to secure the finished ball screw shaft to the support unit. All support units come with angular contact bearings which are assembled with the correct preload and amount of lubrication.

Supported-Side Support Units

The Supported-Side Support Units are available in three series, EF, BF, and FF. These support units are compact in size and allow for easy installation. The supported-side (also referred to as floated side) support units come with a bearing and snap ring to securely mount the finished ball screw shaft to the support unit. (Note: The bearing is not fixed to a position inside the supported-side support unit).


 Features
Simplicity of Design and Assembly Standardization of product allows highly effective design. Additional assembly process is not required, and the stability of assembly precision can be easily improved as bearing of the support unit is assembled at optimal preload condition. Moreover, the standardized product ensures superior compatibilty.
 
High Precision
 
Angular contact ball bearing is precisely assembled in face-to-face duplex format. The influence by assembly error is minimized and the precision of rotation shaft is maintained as the product structure is designed to absorb parallel error between rotational shaft and guide about the center of the shaft.
 
Dust-Proof Effect  
 
The support unit is framed with oil seal to prevent the influx of fine dusts or foreign substances and thus enhances operation precision. Furthermore, it allows longtime use as grease leakage is prevented by minimizing the tolerance between the oil seal and the rotation shaft.

Here you can download PDF files,3D models and 2D drawings of our products.

Pictures and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data. Some details on the product can be visually different from those shown in the pictures.

Možda će vam se također svidjeti…

Nazad na Vrh